Posted by ibm123str | 26 Aug, 2010
- Fully charge/discharge IBM Thinkpad A22E battery up to 4 cycles before achieving full capacity of a new IBM Thinkpad A22E battery
- Fully discharge and then fully charge the IBM Thinkpad A22E battery every two to three weeks for battery conditions.
- Run the device under the ibm Thinkpad A30 battery's power until it shuts down or until you get a low battery warning. Then recharge the IBM Thinkpad A22E battery as instructed in the user's manual.
- Remove from the device and stored in a cool, dry, clean place if the IBM Thinkpad A22E battery will not be in use for a month or longer.
- Recharge the IBM Thinkpad A22E battery after a storage period.
- Ensure maximum performance of the IBM Thinkpad A22E battery by optimizing the device's power management features. Refer to the manual for further instructions.
- Do not short-circuit. A short-circuit may cause severe damage to the IBM Thinkpad A22E battery.
- Do not drop, hit or otherwise abuse the ibm Thinkpad R30 battery as this may result in the exposure of the cell contents, which are corrosive.
- Do not expose the IBM Thinkpad A22E battery to moisture or rain.
- Keep ibm ThinkPad R32 battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of battery to extreme heat may result in an explosion.
This entry was posted on 26 August, 2010 03:43
and file under
General, ibm ThinkPad R32 battery .
You can follow any responses to this entry through the
RSS2.0 feed.
You can leave a Response, or Trackbacks from your own site.
